Fevicol Adhesive

Product Details:

Bubble has always been a trouble in Woodworking especially in vertical laminations or large sheet laminations.

And there can be numerous reasons for it:

• Workmanship
• Quality of Laminate/ Plywood
• Expansion/ Contraction in the Substrates in the process of curing
• Climatic Conditions – Humidity/ Temperature

While Adhesive is not directly responsible for Bubble Formation, it was realized that an adhesive with superior grab can reduce the chances of bubble formation to a great extent:

• Fevicol Hi-Per powered with Anti-Bubble formula provides instant grab and uniform glue transfer leading to a strong contact between plywood & laminate.
• Hence there is a very little chance of air entrapment and contact gap which significantly reduces the probability of bubble formation. It also offers superior tack development, faster grab and reduced setting time.

• Anti-Bubble Formula
• Best in class waterproof adhesive
• Faster Setting time: 2hrs
• Unique Blue Colour

• Significantly reduces the chance of bubble formation
• Good for Water prone areas
• Faster completion of work
• No chance of duplicate quality
• Easy identification of missing patch / point and even glue coating during application.

• Plywood to Laminate
• Plywood to Veneer
• Any Wood to Wood bonding
• MDF/Particle board/ Block board to laminate.

Product Details:

New age materials like Acrylic and PVC sheets have come into the use which give excellent factory finish look as desired by certain clients. It is felt that good finish, using these materials requires special equipment like edge banding machines, as regular white adhesives / rubber adhesives do not work well.

Features:

• Excellent compatibility with PVC and Acrylic
• High Strength with long & durable bonding
• Excellent Spread ability and High Coverage
• Excellent heat resistance

Benefits:

• Best solution for fixing Acrylic/ PVC sheets
• Helpful for manual edge binding
• Good for PVC edge binding
• Saves cost
• Excellent for heat prone applications like kitchen or high temperature climatic zones

• Plywood to PVC sheets/ rolls
• Plywood to Acrylic sheets
• PVC edge Banding
• Ply board to Charcoal sheets

• The basic steps are similar to standard Fevicol applications. Apply masking tape on the edges & keep the bonded substrates under pressure for 2-3 hrs before starting cutting/ finishing work.

PVC Edge Banding (Single side Application):

• Apply glue on one edge surface of the Plywood / MDF / Particle Board and spread the glue uniformly on the edge with the help of spreader / knife / spatula
• Join PVC & apply pressure uniformly to ensure excess glue oozing out from the joint portion. Remove softly and carefully using cloth/ cotton
• Press the edge band joint for 2 – 5 minutes under manual hand pressure. Use masking tape to hold the joint firmly. The bond strength is obtained within 4-6 hrs. Full strength will be developed after 24 Hrs. at room temp
• For faster work within 1 Hr, wrap the edge with thick cotton cloth and apply heat using Iron for 1 minutes and repeat the steps for four to five times

Product Details:

Whenever you use waterproof Plywood, you need to use Waterproof Adhesive also otherwise the laminate starts de-bonding after some time. Waterproof Ply or Adhesive, both are not only waterproof and stronger than standard Ply or adhesive but costlier too. So people restrict it to only to water prone areas.

Features:

• 5 Hours Boiling Waterproof
• 5 Days Normal Waterproof
• 5 hrs setting time
• 5kg bonds 7 laminate sheets

• Always use with Marine Plywood
• Use for all general woodworking purposes

• The basic steps are similar to standard Fevicol applications. Apply masking tape on the edges & keep the bonded substrates under pressure. Handling strength achieved in 4hrs after that one can start trimming work.

Product Details:

Fevicol SR 998 IS is a synthetic rubber based solvent containing contact adhesive. It exhibits excellent bond strength. The adhesive dries in a tough flexible film with good resistance to water and ageing. It can be applied by brush or roller.

Features:

• Free from benzene makes it non-hazardous
• Excellent strength
• Superior resistance to water
• Fast drying

Caution:

• Highly inflammable, contains solvents

Product Details: